Electric car charging station

• Bring your own cable with Type-2 connector, there is no cable mounted on the charging station itself.
• Electricity consumption when charging an electric car is measured by the electricity meter, which measures the electricity consumption for the whole house and is therefore settled normally via the holiday home rental.
• Charging can only be started with an RFID key tag (provided together with the key to the cottage door).

Cable

The charging station does not have a fixed cable, so bring your own with a Type-2 plug (IEC 62196-2) at the end where the charging station is connected.

Charging station and power

The charging station can charge with up to 3 phases x 16 Amps or up to 11 kW. If the electric car does not support 3 phases, the charging station adapts accordingly.

RFID key tag and charging procedure

Each charge must be authorized with a white "tag" (in the pictures it is black with the inscription "easee"). You will receive this piece together with the door key at the rental agency.
Insert your cable in your car and in the electric car charging station. Then hold the chip on top of the RFID reader which is located just below the LED strip (it is possible that the LED strip does not light up, this does not mean that it does not work)
When charging is authorized, the entire LED strip lights up green and charging is started.